|
|
Electrically operated 120 volt (60 Hz) not more than 2.4 amp. Shall have specially designed motor mounted inside the roller, to be three wire with
ground quick reversal type, oiled for life, with automatic thermal overload cut-out, integral gears, capacitor and an electric brake to
prevent coasting. To have pre-set but adjustable limit switches to automatically stop picture surface in the “up” and “down”
positions.
|
| Electric Screens :Tensioned Contour |
 |
|
Electrically operated 120 volt (60 Hz) not more than 2.4 amp. Shall have specially designed motor mounted inside the roller, to be three wire with ground, quick reversal type, oiled for life, with automatic thermal overload cutout, integral gears, capacitor and an electric brake to
prevent coasting.
|
| Fixed Frame Screens : Cinema Contour |
 |
| To have flexible screen surface, fire retardant and mildew resistant. Screen surface standard with reinforced black binding on all four
sides and will attach to frame with metal snaps. Frame will conceal snaps and binding. Screen frame will be 3" wide x 15/8" deep with a
tapered front edge to reduce shadows on the viewing surface. Frame to be made of aluminum and finished with black Pro-Trim® fabric
covering to enhance appearance and absorb light surrounding the viewing area. Frame will be slip-jointed at corners and joints.
Standard wall-mounting brackets will be included.
|
| Fixed Frame Screens : DA-SNAP
screens |
 |
| To have flexible screen surface, fire retardant and mildew resistant. Screen surface standard with reinforced black binding on all four
sides and will attach to frame with metal snaps. Frame will conceal snaps and binding. Screen frame will be 11/2" square matte black
powder coated aluminum. Walls will be ribbed for strength and light weight. Frame will be slip-jointed at corners and joints. Standard
wall-mounting brackets will be included.
|
| Manual wall and ceiling Screens : ADVANTAGE Manual with CSR |
 |
| To have surface with black masking borders standard on flame retardant and mildew resistant fiberglass fabric,
mounted on a ball bearing rigid steel spring roller. To be equipped with Controlled Screen Return (CSR) to control the return speed of
the screen surface back into the case. Fabric to be permanently attached to roller. Top, front, and back of case to be made of extruded
aluminum. End caps to be of heavy gauge steel. Bottom of case to have a removable access door. Entire case to be powder coated
white. Bottom of case to be self-trimming, with a built-in flange around the bottom of the case. Bottom of screen shall be formed into
pocket holding tubular metal slat.
|
|
TOP |
